login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Ships by Class/Type: Destroyers
This forum covers all types of destroyers from all eras.
Hosted by Martin J Quinn
USS Fletcher and USS England
McRunty
Visit this Community
Missouri, United States
Joined: April 06, 2016
KitMaker: 50 posts
Model Shipwrights: 17 posts
Posted: Wednesday, August 09, 2017 - 05:54 AM UTC
This will be my first full ship build documented on this forum.

After working on and off on my HMS Warspite with full Pontos kit I decided I wanted to work on something a little simpler before tackling another Capital Ship. I have opted to build Tamiya's USS Fletcher (DD) as well as Trumpeters USS England (DE). Rather than doing 2 build logs I am going to build them both at the same time and document as I go along.

For USS Fletcher I have the full Eduard PE kit as well as some Alliance Models twin bofors.

For the USS England I am going to mostly build OOB but I have purchased a set of railings, l'Arsenal 20mm orlikons and I will use left over PE from the Fletcher and Warspite i.e. portholes, hatches etc.

First pictures are of the hull of USS England. I had no issues with the Fletcher hull so didn't take any pictures.

Had to do a fair amount of putty and sanding to get the hull halves to smoothly match up with each other.



Also the stern had a large gap that needed filling.



I am currently masking and spraying the hulls. Pics of that to follow.
ghauser
Visit this Community
Colorado, United States
Joined: March 07, 2011
KitMaker: 132 posts
Model Shipwrights: 115 posts
Posted: Wednesday, August 09, 2017 - 06:25 AM UTC
Rory,

Cool! I will be following along as I have both of these ships in my stash.
d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 118 posts
Model Shipwrights: 52 posts
Posted: Wednesday, August 09, 2017 - 10:17 AM UTC
I must have lucked out with the hull of my England as it went together very easily and the fit was great. Only had to do some minor puttying to remove the seam.
McRunty
Visit this Community
Missouri, United States
Joined: April 06, 2016
KitMaker: 50 posts
Model Shipwrights: 17 posts
Posted: Wednesday, August 09, 2017 - 02:43 PM UTC
Hulls have been painted. Both are in Measure 21 as that's the standard colour for the England and I am doing Fletcher in her '43 Solomon's configuration. I have lightened the blue slightly so it pops a bit more at this scale. Sorry for the pic quality as I am using my phone to take pics.

USS Fletcher:



USS England:
McRunty
Visit this Community
Missouri, United States
Joined: April 06, 2016
KitMaker: 50 posts
Model Shipwrights: 17 posts
Posted: Monday, August 14, 2017 - 02:18 AM UTC
As with all plans, my plan to only use spare PE etc on the USS England did not survive contact with the enemy. I got an amazing deal on the WEM Buckly Class PE set so that is now on its way.Work on the England has now halted till that arrives.

Work on USS Fletcher on the other hand continues. I did not accomplish as much as I wanted this weekend but work was done. Front superstructure has had the majority of the PE attached. I will leave the Radar off until its time to be painted since it looks fragile.




Vision ports on the bit below the director were a bugger to put on. Some of the smallest PE I have had to deal with.

Still some cleanup and puttying to be done to hide some join lines etc but I am pretty happy about the results.
Harry_at_BFM
Visit this Community
Colorado, United States
Joined: February 04, 2007
KitMaker: 517 posts
Model Shipwrights: 491 posts
Posted: Monday, August 14, 2017 - 04:29 AM UTC
Looks to be coming along nicely.
McRunty
Visit this Community
Missouri, United States
Joined: April 06, 2016
KitMaker: 50 posts
Model Shipwrights: 17 posts
Posted: Monday, August 14, 2017 - 04:33 AM UTC
Ive just realized I have put the doors on backwards on the lower part of the pilothouse

I shall rectify tonight. So glad I opted to use gator glue and not CA for this project.
McRunty
Visit this Community
Missouri, United States
Joined: April 06, 2016
KitMaker: 50 posts
Model Shipwrights: 17 posts
Posted: Thursday, August 17, 2017 - 01:03 AM UTC
Work continues. All main superstructure components on the USS Fletcher are complete though there is some small cleanup left to do. Nothing is glued down as yet. Will paint before doing that.

Next on the agenda are the gun turrets and the bits and bobs attached to the deck.




d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 118 posts
Model Shipwrights: 52 posts
Posted: Thursday, August 17, 2017 - 07:48 AM UTC
Really nice PE work. She is going to be a beauty.
TRM5150
Staff MemberEditor-in-Chief
MODEL SHIPWRIGHTS
Visit this Community
Massachusetts, United States
Joined: January 03, 2010
KitMaker: 2,082 posts
Model Shipwrights: 1,339 posts
Posted: Thursday, August 17, 2017 - 04:02 PM UTC
Fine work there Rory! Clean work on the shiny stuff!
JJ1973
#345
Visit this Community
Niedersachsen, Germany
Joined: August 22, 2011
KitMaker: 1,377 posts
Model Shipwrights: 1,374 posts
Posted: Sunday, August 20, 2017 - 07:16 AM UTC
Rory,

I completely agree with Mark and Todd,
very nice work and you are making good progress!

Cheers,
Jan
McRunty
Visit this Community
Missouri, United States
Joined: April 06, 2016
KitMaker: 50 posts
Model Shipwrights: 17 posts
Posted: Tuesday, August 22, 2017 - 01:06 AM UTC
More progress to report. Superstructure and deck are painted as well as some of the gubbins located on the deck. None of it is glued down yet. Working on the turrets. Slowly building up the blast bags using white glue so that's taking a while.

WEM PE for the USS England has arrived but without instructions so I am trying to source those so I can get started on her. Till then I will just keep plugging away at the Fletcher.


d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 118 posts
Model Shipwrights: 52 posts
Posted: Tuesday, August 22, 2017 - 01:25 AM UTC
She is coming along nicely.